USB HID
Scan the following code to program the scanner for USB HID bar code scan-
ners.
USB Serial
Scan the following code to program the scanner to emulate a regular RS232-
based COM Port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Honeywell website (www.honeywellaidc.com). The
driver will use the next available COM Port number. Apple® Macintosh comput-
ers recognize the scanner as a USB CDC class device and automatically use a
class driver.
Note: No extra configuration (e.g., baud rate) is necessary.
CTS/RTS Emulation
CTS/RTS Emulation On
ACK/NAK Mode
ACK/NAK Mode On
USB HID Bar Code Scanner
USB Serial
* CTS/RTS Emulation Off
* ACK/NAK Mode Off
2 - 5