Mounting A Ccb01-010Bt Charge Base; Mounting A Ccb02-100Bt Base - Honeywell Xenon 1900 User Manual

2. Make sure the cables are secured in the wireways in the bottom of the
cordless base and the base sits flat on a horizontal surface.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner or cordless base operation by scanning a bar code
from the
beeps once. If using a Granit scanner, it also vibrates.
For further RS485 settings, refer to RS485, page 2-2.

Mounting a CCB01-010BT Charge Base

3.35 in.
85.09mm

Mounting a CCB02-100BT Base

The CCB02-100BT Base can be mounted on either a horizontal or vertical sur-
face. The cables can be routed through either the top or the bottom of the base.
The cables can be routed down through the bottom of the base, securing the
cables in the wireways.
Sample Symbols
2.8 in.
72.1mm
in the back of this manual. The scanner
2.36 in.
59.84mm
8x32 thread
x .39 in. (10mm) deep
1 - 11