Chapter 4 - Input/Output Settings; Power Up Beeper - Honeywell Xenon 1900 User Manual

4
Input/Output Settings

Power Up Beeper

Note: This feature does not apply to the CCB02-100BT base.
The scanner can be programmed to beep when it's powered up. If you are
using a cordless system, the base can also be programmed to beep when it is
powered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On - Scanner.
Power Up Beeper Off -
Scanner
Power Up Beeper Off -
Cordless Base
* Power Up Beeper On -
Scanner
Power Up Beeper On -
Cordless Base
4 - 1