Application Work Group Selection - Honeywell Xenon 1900 User Manual

quently, any desired changes to either the retail or warehouse area would apply
to all scanners in that particular work group. Honeywell's online configuration
tool, EZConfig-Scanning
system for use with multiple scanners and multiple work groups.
The scanner keeps a copy of the menu settings it is using. Whenever the scan-
ner is connected or reconnected to a base or an Access Point, the scanner is
updated with the latest settings from the base or Access Point for its work
group. The scanner also receives menu setting changes processed by the
base or Access Point. If a scanner is removed from a base or an Access Point
and placed into another base or linked to another Access Point, it will be
updated with the new base/Access Point settings for whatever work group to
which that the scanner was previously assigned. For example, if the scanner
was in work group 1 linked to the first base, it will be placed in work group 1 in
the second base with the associated settings.

Application Work Group Selection

This programming selection allows you to assign a scanner to a work group
by scanning the bar code below. You may then program the settings (e.g.,
beeper volume, prefix/suffix, data formatter) that your application requires.
Default = Group 0.
* Group 0
Group 2
Group 4
3 - 28
(page 10-2), makes it easy for you to program your
Group 1
Group 3