Move Commands - Honeywell Xenon 1900 User Manual

Insert key strokes
B5 Insert a key stroke or combination of key strokes. Key strokes are
dependent on your keyboard (see
Any key can be inserted, including arrows and functions. Syntax =
B5xxssnn where xx is the number of keys pressed (without key
modifiers), ss is the key modifier from the table below, and nn is the key
number from the
For example, B501021F inserts an "A" on a 104 key, U.S. style
keyboard. B5 = the command, 01 = number of keys pressed (without
the key modifier), 02 is the key modifier for Shift Right, and 1F is the "a"
key. If a lower case "a" were to be inserted, B501001F would be
entered.
If there are three keystrokes, the syntax would change from B5xxssnn
for one keystroke to B5xxssnnssnnssnn. An example that would insert
"abc" is as follows: B503001F00320030F833.
Note: Key modifiers can be added together when needed. Example:
Control Left+Shift Left = 11.

Move Commands

Move the cursor forward a number of characters
F5 Move the cursor ahead "nn" characters from current cursor position.
Syntax = F5nn where nn is the numeric value (00-99) for the number
of characters the cursor should be moved ahead.
F5 Example: Move the cursor forward and send the data
Move the cursor forward 3 characters, then send the rest of the bar
code data from the bar code above. End with a carriage return.
Command string: F503F10D
F5 is the "Move the cursor forward a number of characters" command
03 is the number of characters to move the cursor
Unicode Key Maps, page A-13.
Key Modifiers
No Key Modifier
Shift Left
Shift Right
Alt Left
Alt Right
Control Left
Control Right
Unicode Key Maps
00
01
02
04
08
10
20
on page A-13).
6 - 9