Entering A Static Ip Address - Net2Phone Max 410 Quick Start Manual

Entering a static IP address

To enter a static IP address:
1. Login via console as described in section "Obtaining the MAX 410's DHCP IP
address".
2. After logging in to the MAX 410, type /config/ip at the command prompt.
3. Type change.
4. Select the IP address configuration menu "1" and enter the given IP address.
[Example]
SYS_NAME:/CONFIG/IP> change
-------- LAN Parameters --------------------------
LAN IP - 150.150.61.58
LAN Subnet Mask - 255.255.255.0
Default G/W IP - 0.0.0.0
LAN Ether Addr - 00:40:5A:72:25:61
-------- Console Parameters ----------------------
Console BaudRate- 19200 BPS
--------------------------------------------------
-------- DNS Parameters --------------------------
1st DNS SERVER IP - 0.0.0.0
2nd DNS SERVER IP - 0.0.0.0
Domain Name
--------------------------------------------------
1. Change IP Address.
2. Change IP Netmask.
3. Change Def. G/W IP.
4. Change Console Baudrate.
5. Change 1st DNS Server IP.
6. Change 2nd DNS Server IP.
7. Change DNS Domain Name.
0. Exit Menu.
What do you want to change (0-7) ? : 1
-
Page 9