Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update - Auerswald COMfortel 1600 Setup Manual

Appendix

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1.
Press the menu key.
2.
Tap on information.
3.
Scroll to the selection version.
4.
Scroll to the selection serial number.

Performing a Firmware Update

Important: Only available for operation on the PBXs COMpact 3000
analog/ISDN/VoIP, COMpact 4000, COMpact 5000/R, COMpact 5010
VoIP, COMpact 5020 VoIP, COMmander 6000/R/RX, COMmander
Basic.2/19" and COMmander Business/19". On the other PBXs a manual
firmware update can be performed instead.
Requirements
– The PBX connected to broadband Internet access
– The address of the update server configured in the PBX
– A DNS server and, if necessary, an HTTP proxy server configured in the
PBX
1.
Press the menu key.
2.
Tap successively on settings > synchronisation > firmware update.
3.
Confirm the message:


54
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
Appendix
The firmware versions of the telephone and the PBX are displayed.
The serial number of the telephone is displayed.
The firmware update is performed. After this, a message appears in the
display indicating whether the update was successful.
Comfortel 1600: Tap on
Comfortel 2600: Tap on OK.
.