Reset Configuration Data; Resources Controlled By; Pnp/Pci Configurations - DFI AZ30-TC User Manual

3
Award BIOS Setup Utility

3.1.6 PnP/PCI Configurations

This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be iden-
tical to this one.

Reset Configuration Data

Enabled The BIOS will reset the Extended System Configuration
Disabled The BIOS will not reset the configuration data.

Resources Controlled By

The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings for
Manual
72
Phoenix - AwardBIOS CMOS Setup Utility
Reset Configuration Data
Resources Controlled By
X IRQ Resources
PCI/VGA Palette Snoop
* PCI IRQ Assignment *
Slot 1
Slot 2
Slot 3
↑↓→← Move
Enter:Select
F5:Previous Values
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
you.
Choose the specific IRQ resources in the "IRQ Re-
sources" field.
PnP/PCI Configurations
Disabled
Auto(ESCD)
Press Enter
Disabled
Auto
Auto
Auto
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
Item Help
Menu Level
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot.
ESC:Exit F1:General Help
F7:Optimized Defaults