DFI AZ30-TC User Manual page 93

4.2.6 Winbond Hardware Monitor
The system board comes with the Winbond Hardware Monitor
utility contained in the provided CD. This utility is capable of
monitoring the system's "health" conditions and allows you to
manually set a range (Highest and Lowest Limit) to the items
being monitored. If the settings/values are over or under the set
range, a warning message will pop-up. The utility can also be
configured so that a beeping alarm will sound whenever an error
occurs. We recommend that you use the "Default Setting" which
is the ideal setting that would keep the system in good working
condition.
To install, please follow the steps below.
1. On the left side of the autorun screen, click the "TOOLS"
icon.
2. Click "Winbond Hardware Monitor" on the main menu. The
following screen will appear.
3. Follow the prompts on the screen to complete installation.
4. Reboot the system for the driver to take effect.
Supported Software
4
93