DFI AZ30-TC User Manual page 23

If your reason for clearing the CMOS data is due to incorrect
setting of the processor's bus clock in the BIOS, please proceed
to step 4.
4. After powering-on the system, press <Del> to enter the main
menu of the BIOS.
5. Select the "Frequency/Voltage Control" submenu and press <En-
ter>.
6. Set the "Clock By Slight Adjust" field to its default setting or an
appropriate bus clock. Refer to "Clock By Slight Adjust" in the
"Frequency/Voltage Control" section in chapter 3 for more infor-
mation.
7. Press <Esc> to return to the main menu of the BIOS setup
utility. Select "Save & Exit Setup" and press <Enter>.
8. Type <Y> and press <Enter>.
Hardware Installation
2
23