The Managed Ap List Screen - ZyXEL Communications SBG3500-N000 User Manual

The following table describes the fields in this screen.
Table 68 Network Setting > AP Control > Controller
LABEL
Enable
Registration
Type
Apply
Cancel

13.3 The Managed AP List Screen

Use this screen to manage all of the APs connected to the SBG3500-N Series. Click Network
Setting > AP Control > Managed AP List to access this screen.
Figure 102 Network Setting > AP Control > Managed AP List
The following table describes the fields in this screen.
Table 69 Network Setting > AP Control > Managed AP List
LABEL
#
IP
MAC
Model
R1 Profile
R2 Profile
AC Mgmt VLAN
AP Mgmt VLAN
Chapter 13 AP Control
DESCRIPTION
Click the check box to enable AP Controller in the SBG3500-N Series.
Select Manual to add each AP to the SBG3500-N Series for management, or Always
Accept to automatically add APs to the SBG3500-N Series for management.
Note: Select the manual option for managing a specific set of APs. This is recommended as
the registration mechanism cannot automatically differentiate between friendly and rogue
APs.
APs must be connected to the SBG3500-N Series by a wired connection or network.
Click Apply to save your changes to the SBG3500-N Series.
Click Cancel to abandon the changes to the SBG3500-N Series.
DESCRIPTION
This is the AP's index number.
This field displays the IP address of the AP.
This field displays the MAC address of the AP.
This field displays the AP's hardware model information. It displays N/A (not applicable)
only when the AP disconnects from the SBG3500-N Series and the information is
unavailable as a result.
This field displays the operating mode (AP) and AP profile name for Radio 1. It displays N/
A for the profile for a radio not using an AP profile.
This field displays the operating mode (AP) and AP profile name for Radio 2. It displays N/
A for the profile for a radio not using an AP profile.
This displays the Access Controller (the SBG3500-N Series) management VLAN ID setting
for the AP.
This displays the runtime management VLAN ID setting on the AP. VLAN Conflict displays if
the AP's management VLAN ID does not match the Mgmnt. VLAN ID(AC). This field
displays N/A if the SBG3500-N Series cannot get VLAN information from the AP.
SBG3500-N Series User's Guide
223