Station List Screen - ZyXEL Communications SBG3500-N000 User Manual

The following table describes the labels in this screen.
Table 130 System Monitor > AP Monitor > Radio List
LABEL
#
Loading
AP Description
Model
MAC Address
Radio
Profile
Frequency Band
Channel ID
Station
Rx PKT
Tx PKT
Rx FCS Error
Count
Tx Retry Count
Action
Refresh
The following table describes the icons in this screen.
Table 131 System Monitor > AP Monitor > Radio List Icons
LABEL

31.4 Station List Screen

Use this screen to view statistics pertaining to the associated stations (or "wireless clients"). Click
System Monitor > AP Monitor > Station List to access this screen.
Figure 168 System Monitor > AP Monitor > Station List
Chapter 31 AP Monitor
DESCRIPTION
This field is a sequential value, and it is not associated with a specific profile.
This indicates the AP's load balance status (UnderLoad or OverLoad) when load
balancing is enabled on the AP. Otherwise, it shows - when load balancing is disabled or
the radio is in monitor mode. See below table for icons that appears in this field.
This field displays the description of the AP to which the radio belongs.
This field displays the model of the AP to which the radio belongs.
This field displays the MAC address of the radio.
This field displays the radio number on the AP to which it belongs.
This field displays the profile name to which the radio belongs.
This field displays the wireless frequency currently being used by the radio.
This field displays the radio's channel ID.
This field displays the number of stations (aka wireless clients) associated with the radio.
This field displays the total number of packets received by the radio.
This field displays the total number of packets transmitted by the radio.
This field displays the number of received packets errors accrued by the radio.
This field displays the number of times the radio has attempted to re-transmit packets.
Click Action icon to add or delete the selected radio to the radio list.
Click Refresh button to see the latest changes to the SSID list.
DESCRIPTION
When an AP is being load balanced, this icon means it is operating over the maximum
allocated bandwidth.
When an AP is being load balanced, this icon means it is operating under the maximum
allocated bandwidth.
SBG3500-N Series User's Guide
321