Example E-Mail Log - ZyXEL Communications SBG3500-N000 User Manual

The following table describes the fields in this screen.
Table 142 Maintenance > Logs Setting
LABEL
Syslog Setting
Syslog Logging
Mode
Syslog Server
UDP Port
E-mail Log Settings
Mail Server
System Log Mail
Subject
Security Log Mail
Subject
Send Log to
Send Alarm to
Alarm Interval
Allowed Capacity
Before Email
Clear log after
sending mail
Active Log and Alert
System Log
Security Log
Send immediate
alert
Apply
Cancel

39.2.1 Example E-mail Log

An "End of Log" message displays for each mail in which a complete log has been sent. The
following is an example of a log sent by e-mail.
• You may edit the subject title.
Chapter 39 Logs Setting
DESCRIPTION
The SBG3500-N Series sends a log to an external syslog server. Select Enable to
enable syslog logging.
Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select
Local File, the log(s) will be saved in a local file. If you want to send the log(s) to a
remote syslog server and save it in a local file, select Local File and Remote.
Enter the server name or IP address of the syslog server that will log the selected
categories of logs.
Enter the port number used by the syslog server.
Enter the server name or the IP address of the mail server for the e-mail addresses
specified below. If this field is left blank, logs and alert messages will not be sent via E-
mail.
Type a title that you want to be in the subject line of the system log e-mail message
that the SBG3500-N Series sends.
Type a title that you want to be in the subject line of the security log e-mail message
that the SBG3500-N Series sends.
The SBG3500-N Series sends logs to the e-mail address specified in this field. If this
field is left blank, the SBG3500-N Series does not send logs via E-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a DoS
attack, system error, or forbidden web access attempt occurs. Enter the E-mail address
where the alert messages will be sent. Alerts include system errors, attacks and
attempted access to blocked web sites. If this field is left blank, alert messages will not
be sent via E-mail.
Specify how often the alarm should be updated.
Set what percent of the SBG3500-N Series's log storage space can be filled before the
SBG3500-N Series sends a log e-mail.
Select this to delete all the logs after the SBG3500-N Series sends an E-mail of the logs.
Select the categories of system logs that you want to record.
Select the categories of security logs that you want to record.
Select log categories for which you want the SBG3500-N Series to send E-mail alerts
immediately.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
SBG3500-N Series User's Guide
340