Table 69 Network Setting > AP Control > Managed AP List (continued)
LABEL
Description
Modify
13.4 The Load Balancing Screen
Use this screen to manage wireless network traffic load balancing between all of the APs connected
to the
SBG3500-N Series
screen.
Figure 103 Network Setting > AP Control > Load Balancing
The following table describes the fields in this screen.
Table 70 Network Setting > AP Control > Load Balancing
LABEL
Load Balancing Configuration
Enable Load
Balancing
Load Balancing
Mode
Max Station
Number
Chapter 13 AP Control
DESCRIPTION
This field displays the AP's description, which you can configure by selecting the AP's entry
and clicking the Edit button.
Click the Edit icon to edit the AP's properties.
Click the Delete icon to delete an existing AP. Note that subsequent AP moves up by one
when you take this action.
Click Reboot icon to reboot the APs that are connected to the SBG3500-N Series.
. Click Network Setting > AP Control > Load Balancing to access this
DESCRIPTION
Click the check box to enable the Load Balancing on wireless network traffic between APs
connected to the SBG3500-N Series.
Choose By Station Number or By Traffic Level from the drop-down list. If you choose By
Station Number you will need to enter the maximum number of stations in the field below. If
you choose By Traffic Level, you will need to choose High, Medium or Low from a drop-
down list that appears below this field.
This field displays only when you choose By Station Number mode. The maximum number
of AP station you can enter is 1 to 127.
SBG3500-N Series User's Guide
224