Add New Profile/Modify Layer-2 Isolation - ZyXEL Communications SBG3500-N000 User Manual

14.7.1 Add New Profile/Modify Layer-2 Isolation

This screen allows you to create a new rule in the Layer-2 Islation Profile or edit an existing one. To
access this screen, click the Add New Profile button or select an entry from the list and click the
Modify button.
Figure 115 Network Setting > AP Profile > Layer-2 Isolation > Add New Profile/Modify
The following table describes the labels in this screen.
Table 81 Network Setting > AP Profile > Layer-2 Isolation > Add New Profile/Modify
LABEL
Profile Name
Filter Action
Add New Entry
#
MAC
Description
Modify
Chapter 14 AP Profile
DESCRIPTION
Enter a name for this Layer-2 Isolation Profile. Enter up to 18 characters, spaces and
underscores allowed.
Filter Action permits the wireless client with the MAC addresses in the Layer-2 Islation
Profile to connect to the network through the associated SSID; The default value is Allow.
Click Add New Entry button to add new Layer-2 Isolation Profile.
This field is a sequential value, and it is not associated with a specific profile.
Enter a MAC address associated with the layer-2 islation profile.
Enter a description of the MAC address of the layer-2 isolation profile in this field. Enter up
to 60 characters, spaces and underscores allowed.
Click the Delete icon to delete an existing Layer-2 isolation profile. Note that subsequent
Layer-2 isolation profile moves up by one when you take this action.
SBG3500-N Series User's Guide
242