Table 10 Bridge Mode (ADSL over ATM) (continued)
LABEL
Maximum Burst
Size
QoS
Rate Limit
Apply
Cancel
6.3 The 3G WAN Screen
Use this screen to configure your 3G settings. Click Network Setting > Broadband > 3G WAN.
Note: The actual data rate you obtain varies depending the 3G card you use, the signal
strength to the service provider's base station, and so on.
Chapter 6 Broadband
DESCRIPTION
Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at the
peak rate. Type the MBS, which is less than 65535.
This field is available only when you select Non Realtime VBR or Realtime VBR.
Enter the rate limit for the connection. This is the maximum transmission rate allowed for
traffic on this connection.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
SBG3500-N Series User's Guide
114