The Guest/More Ap Screen - ZyXEL Communications XMG3512-B10A User Manual

Click Network Setting > Wireless to display the General screen. Select More Secure as the security level.
Then select WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 35 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 20 Wireless > General: More Secure: WPA(2)-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
more.../hide
Encryption
Group Key
Update Timer

7.3 The Guest/More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the XMG.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
Chapter 7 Wireless
DESCRIPTION
Select More Secure to enable WPA(2)-PSK data encryption.
Select WPA-PSK or WPA2-PSK from the drop-down list box.
Select this option to have the XMG automatically generate a password. The password field will
not be configurable when you select this option.
The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only difference
between the two is that WPA(2)-PSK uses a simple common password, instead of user-specific
credentials.
If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters. Select password unmask to display the entered
password in plain text. Clear it to hide the password to avoid shoulder surfing.
Click more... to show more fields in this section. Click hide to hide them.
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to
all clients.
XMG3512-B10A User's Guide
89