The Guest/More Ap Screen - ZyXEL Communications VMG3312-T20A User Manual

The following table describes the labels in this screen.
Table 20 Wireless > General: More Secure: WPA2-PSK
LABEL
Security Level
Security Mode
Generate
password
automatically
Password
more.../hide
Encryption
Group Key
Update Timer

7.3 The Guest/More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the VMG.
Click Network Setting > Wireless > Guest/More AP. The following screen displays.
The following table introduces the supported wireless networks..
Table 21 Supported Wireless Networks
WIRELESS
NETWORKS
Main/1
Guest/3
Figure 39 Network Setting > Wireless > Guest/More AP
Chapter 7 Wireless
DESCRIPTION
Select More Secure to enable WPA2-PSK data encryption.
Select WPA-PSK, WPA2-PSK or WPA-WPA2-PSK from the drop-down list box.
Select this option to have the VMG automatically generate a password. The password field will
not be configurable when you select this option.
If you did not select Generate password automatically, you can manually type a pre-shared key
from 8 to 64 case-sensitive keyboard characters.
Select password unmask to display the entered password in plain text. Clear it to hide the
password to avoid shoulder surfing.
Click more... to show more fields in this section. Click hide to hide them.
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group key out to
all clients.
WHERE TO CONFIGURE
Network Setting > Wireless >
General screen
Network Setting > Wireless >
Guest/More AP screen
VMG3312-T20A User's Guide
101