Table of Contents
Advertisement
Figure 29 Configuration > Wireless > Wireless: WPA2-PSK
The following table describes the labels in this screen.
Table 22 Configuration > Wireless > Wireless: WPA-PSK/WPA2-PSK
LABEL
Security Mode
WPA-PSK
Compatible
PMF
Pre-Shared Key
Group Key Update
Timer
Apply
Cancel
7.4 More AP Screen
This screen allows you to enable and configure multiple wireless networks and guest wireless network
settings on the EMG2881-T20A.
Chapter 7 Wireless LAN
DESCRIPTION
Select WPA2-PSK to enable data encryption.
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to your
EMG2881-T20A.
Protected Management Frames (PMF) is a protection mechanism of action management
frames.
Check this field to allow wireless devices using the PMF protection mechanism to connect to
your EMG2881-T20A.
WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
The Group Key Update Timer is the rate at which the AP sends a new group key out to all
clients.
The default is 3600 seconds (60 minutes).
Click Apply to save your changes back to the EMG2881-T20A.
Click Cancel to reload the previous configuration for this screen.
EMG2881-T20A User's Guide
61
Advertisement
Table of Contents
