The More Ap Screen - ZyXEL Communications VMG1312-B10B Series User Manual

Table 21 Wireless > General: More Secure: WPA(2) (continued)
LABEL
Authentication Server
IP Address
Port
Number
Shared
Secret
more.../less
WPA
Compatible
Encryption
WPA2 Pre-
Authentication
Network Re-
auth Interval
Group Key
Update Timer

7.3 The More AP Screen

This screen allows you to enable and configure multiple Basic Service Sets (BSSs) on the Device.
Click Network Setting > Wireless > More AP. The following screen displays.
Figure 36 Network Setting > Wireless > More AP
VMG1312-B10B / VMG1312-B30B Series User's Guide
DESCRIPTION
Enter the IP address of the external authentication server in dotted decimal notation.
Enter the port number of the external authentication server. The default port number is
1812.
You need not change this value unless your network administrator instructs you to do so
with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared between the
external authentication server and the Device.
The key must be the same on the external authentication server and your Device. The key is
not sent over the network.
Click more... to show more fields in this section. Click less to hide them.
This field is only available for WPA2. Select this if you want the Device to support WPA and
WPA2 simultaneously.
Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
This field is available only when you select WPA2.
Pre-authentication enables fast roaming by allowing the wireless client (already connecting
to an AP) to perform IEEE 802.1x authentication with another AP before connecting to it.
Select Enabled to turn on preauthentication in WAP2. Otherwise, select Disabled.
Specify how often wireless stations have to resend usernames and passwords in order to
stay connected.
If wireless station authentication is done using a RADIUS server, the reauthentication timer
on the RADIUS server has priority.
The Group Key Update Timer is the rate at which the RADIUS server sends a new group
key out to all clients.
Chapter 7 Wireless
111