Download Print this page

Heart Rate Measurement - Epson PS-100 User Manual

Hide thumbs

Advertisement

Heart rate measurement

Heart rate detection
1
Heart rate detection starts when the product is moved and the LEDs flash in sequence as
shown belo w.
Note:
Heart rate detection will stop if the product is not worn and has not been moved for three minutes.
Heart rate detection will start again when the product is moved.
2
After putting on the product, the blue LEDs flash two times when it detects your heart rate. The
product is in pulse measurement mode.
Note:
- Try to keep your body and arm still to facilitate heart rate detection.
- If the device does not detect your heart rate within one minute, the product will vibrate.
- If the device does not detect your heart rate within three minutes, the product will vibrate for longer and
the LEDs will flash for 10 seconds. The PS-100 will stop the heart rate detection.
- You can resume heart rate detection by moving the product.
Using your PS-100 • 21

Advertisement

loading

  Also See for Epson PS-100