Graphics Configuration
System boards may or may not have on-board graphics. If your Model 743 does not have a
graphics card, and the customer wants to run an application that requires graphics, either a
743 board computer with on-board graphics installed must be ordered to replace the origi-
nal board, or graphics capability must be added to the system through the installation of
the Expansion Kit or an HCRX graphics board. The Expansion Kit allows up to two HP
A4267A graphics cards to be installed. The HCRX8 or HCRX24 board allows one HP
A4267A card to be installed.
NOTE:
Graphics Information in Menus
Table 3-6 lists the graphics sub-system combinations with how their installed positions
display in the Hardware Information Menu.
Table 3-6
Graphics Configuration
743 Onboard graphics
(1)HP A4267A card (no
on-board graphics)
(2)HP A4267A cards (no
on-board graphics)
On-board graphics and
(1) HP A4267A card
On-board graphics and
(2) HP A4267A cards
HCRX board (no on-
board graphics)
HP-UX 10.0 or later must be installed to support three graphics
displays. HP-RT supports only one graphics display.
Graphics Sub-System Combinations
GRAPHICS 1
GRAPHICS 1
Left GSC connector, GRAPHICS 1
Middle GSC connector GRAPHICS 2
On-board graphics, GRAPHICS 1
HP A4267A card, GRAPHICS 2
On-board graphics, GRAPHICS 1
Left GSC connector, GRAPHICS 2
Middle GSC connector, GRAPHICS 3
GRAPHICS 1
Graphics Configuration
Boot Console Menu Label
Configuration
3-29