HP 743 Service Handbook page 88

Configuration
Graphics Configuration
Table 3-6
Graphics Configuration
HCRX board and on-
board graphics
HCRX board and HP
A4267A card (no on-
board graphics)
HCRX board and HP
A4267A card and on-
board graphics
To change or view the EEPROM graphics configurations:
1 Select Path Configuration from the Main menu by pressing:
2
Enter
The system displays the Path Configuration menu, as shown:
==== PATH CONFIGURATION ======================
PRIMARY PATH
ALTERNATE PATH is now [ LAN.090009-723333 ]
CONSOLE PATH
KEYBOARD PATH is now
Key
---
1 Primary Boot Path
2 Alternate Boot Path
3 Console Path
4 Keyboard Path
...
0 Previous Menu
77 Reset the System
----------------------------------------------
Press Key, then press [Enter/Return]
2 Select the Console Path menu by pressing 3 Enter
The system displays a Console Path menu, similar to the following:
3-30
Graphics Sub-System Combinations
is
is
Operation
-----------------------------------------
.........................................
Boot Console Menu Label
On-board graphics, GRAPHICS 1
HCRX board, GRAPHICS 2
HCRX board, GRAPHICS 1
HP A4267A card, GRAPHICS 2
On-board graphics, GRAPHICS 1
HCRX board, GRAPHICS 2
HP A4267A card, GRAPHICS 3
now [ SCSI.6.0 ]
now [ RS-232 (A) ]
[ PS/2 (0) ]