HP 743 Service Handbook page 102

Troubleshooting
Boot Options
Scanning for Boot devices. Please wait...
==== BOOT FROM DEVICE ========================
Key Boot Device
--- -----------------------------------------
1 SCSI.6.0 QUANTUM FIREBALL1050S
2 SCSI.5.0 QUANTUM FIREBALL1050S
3 LAN.15.20.93.16 INSTALL 15.20.93.16
4 LAN.15.20.88.47 INSTALL 15.20.88.47
5 LAN.15.20.88.100 INSTALL 15.20.88.100
6 LAN.15.20.88.96 INSTALL 15.20.88.96
7 LAN.15.20.92.249 INSTALL fibula
... .........................................
0 Previous Menu
33 Effective ISL Mode
66 Rescan for Boot devices
77 Reset the System
----------------------------------------------
To boot from a device, Press Key, then press [Enter/Return]
Selecting a device from this menu causes an immediate attempt to boot a system from that
device. A boot session begins when:
System power is turned on.
The reset switch is pressed.
Following a transfer of control from an operating system.
The Boot From a Device menu is the only menu from which you can view systems which
are capable of both installing software and from which you can boot in order to install
operating system software. These are known as INSTALL systems.
The bottom portion of the Boot From a Device menu allows you to:
Return to the previous menu (for example, the Main Menu).
Change the effective ISL mode (INTERACTIVE or AUTOMATIC). This value is
valid for the current Boot Console Handler (BCH) session only. Its initial value is
determined by the current mode.
Restart the search for bootable devices.
Reset the system.
Boot from Alternate or Primary Path device NOW (immediately on choosing one
of these paths.)
4-12
[ AUTOMATIC ]