Figure 5-11 Removing a PMC card from the Bridge Adapter
10 To remove a PMC card from the bridge adapter, remove the four screws from the bot-
tom of the bridge adapter and separate the PMC card from the bridge adapter, as shown
in Figure 5-11.
NOTE:
Removing and Replacing the PMC Adapters
To replace the adapters, reverse the steps in the procedure for
removing the adapters.
When installing an expansion adapter, be certain that the connector
between the bridge adapter and the expansion adapter is fully
seated. This may require removing memory cards to access the
bridge adapter.
Field Replaceable Units
5-25