Boot Options - HP 743 Service Handbook

Troubleshooting

Boot Options

Boot Options
If the usual boot device (typically a disk) is not responding as it should, you must attempt
to boot from the disk (or another boot device) by selecting it manually. You may also want
to access the ISL or Interactive Testing capabilities of the system.
To access boot options, follow these steps:
1 Power off your board computer for a few seconds.
2 Turn the power back on.
The system displays the following:
PDC - Processor Dependent Code - Version 300.0 release
0 (c) Copyright 1994 Hewlett-Packard Company, All rights
------------------------------------------------------
128 Mbytes of memory configured.
System Search started
Press [Esc] to discontinue the Auto Boot process
3 Press and hold the Esc key as soon as the screen appears.
The system displays the Main Menu, as shown:
==== MAIN MENU ===============================
Key Operation
--- -----------------------------------------
1 Boot From a Device
2 Path Configuration
3 Mode Configuration
4 Interactive Testing
5 Firmware Information
6 Hardware Information
7 system Configuration
... .........................................
77 Reset the system
88 Change Mode
99 Restart Auto Boot
----------------------------------------------
Press Key, then press [Enter/Return]
4-10