Fuel - Honda FRC800 Owner's Manual

Hide thumbs Also See for FRC800:
Table of Contents

Advertisement

Available languages

Available languages

2.After washing the tiller, wipe dry all accessible surfaces.
3.Start the engine outdoors, and let it run until it reaches normal
operating temperature to evaporate any water remaining on the
engine.
4.While the engine is running, operate the clutch lever to expel water
from the pulleys, belts, and other moving items.
5.Stop the engine and allow it to cool.
6.After the tiller is clean and dry, touch up any damaged paint and coat
other areas with a light film oil. Lubricate the throttle cable core with
a silicone spray lubricant.

Fuel

Depending on the region where you operate your equipment, fuel
formulations may deteriorate and oxidize rapidly. Fuel deterioration and
oxidation can occur in as little as 30 days and may cause damage to
the carburetor and/or fuel system. Please check with your servicing
dealer for local storage recommendations.
Gasoline will oxidize and deteriorate in storage. Old gasoline will cause
hard starting, and it leaves gum deposits that clog the fuel system. If
the gasoline in your tiller deteriorates during storage, you may need to
have the carburetor and other fuel system components serviced or
replaced.
The length of time that gasoline can be left in your fuel tank and
carburetor without causing functional problems will vary with such
factors as gasoline blend, your storage temperatures, and whether the
fuel tank is partially or completely filled. The air in a partially filled fuel
tank promotes fuel deterioration. Very warm storage temperatures
accelerate fuel deterioration. Fuel deterioration problems may occur
within a few months, or even less if the gasoline was not fresh when
you filled the fuel tank.
STORAGE
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents