Transmission Oil Level Check - Honda FRC800 Owner's Manual

SERVICING YOUR TILLER

TRANSMISSION OIL LEVEL CHECK

Check the transmission oil level with the tiller on a level surface and
the engine stopped.
1.Remove the transmission oil level check bolt and sealing washer. The
oil should be level with the lower edge of the oil filler hole.
2.If the oil level is low, remove the transmission oil filler cap and add
the same type of oil recommended for the engine (see page 35).
3.Reinstall the oil filler cap. Reinstall the oil level check bolt and a new
sealing washer, and tighten the bolt securely.
OIL FILLER HOLE
36
TRANSMISSION
OIL FILLER CAP
TRANSMISSION OIL
LEVEL CHECK BOLT
SEALING WASHER
(Replace)
LEVEL