Honda FRC800 Owner's Manual page 47

SERVICING YOUR TILLER
During adjustment, line up the groove of the engine-side pulley and
that of the transmission-side pulley. If they are not aligned, the belt
may come off or will wear prematurely.
5.Squeeze the clutch lever, and adjust the clearance between the belt
stoppers, as illustrated.
6.After adjustment has been completed, fasten the belt stopper bolts
and engine mounting bolts securely.
7.Install the belt cover.
After checking or adjusting the drive belt, be sure to reinstall the belt
cover. The cover is designed to help shield you from the moving belt
and pulleys.
Contact with the moving belt or pulleys may
cause you or your clothing to get caught in
the moving parts, resulting in serious
accident or injury.
Always keep the belt cover installed when
operating the tiller.
44
ENGINE-SIDE PULLEY
0.04 - 0.12 in (1 - 3 mm)
0.28 - 0.35 in (7 - 9mm) 0.28 - 0.35 in (7 - 9mm)
TRANSMISSION-SIDE PULLEY