Honda FRC800 Owner's Manual page 26

Forward Gear Selection
1.Return the throttle lever to the slowest position.
2.Release the clutch lever to disengage the clutch.
3.Move the shift lever to the desired gear position.
The tines will only operate when the shift lever is positioned in the
yellow zone.
If the shift lever will not engage the desired gear, squeeze the clutch
lever and move the tiller slightly to reposition the gears.
NEUTRAL POSITION
Gear Selection Table (Throttle in FAST position)
Gear position
1
2
3
TINE/WHEELS
ENGAGE 1
TINE/WHEELS
ENGAGE 2
R
*Tiller speed applies when standard tires are used.
Tiller speed *Tine speed
0.4 mph
0.9 mph
2.9 mph
219 rpm
—
—
0.4 mph
Moving tiller, loading tiller onto a
—
truck, taking tiller on or off field
Moving tiller, loading tiller onto a
—
truck, taking tiller on or off field
— Moving tiller
Tilling, ground breaking, weeding
Tilling, ground breaking, weeding
—
Moving tiller, loading/unloading
—
tiller from a truck, taking tiller on
or off field
OPERATION
GEARSHIFT LEVER
Suitable work
23