Operation; Master-Slave Set Up - ADJ Inno Pocket Wash User Instructions

Inno Pocket Wash
Universal DMX Control:
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Pocket Wash has 4 DMX channel modes; 9 channel
mode, 11 channel mode, 19 channel mode, and 21 channel
mode. See pages 21-28 for detailed description of the DMX val-
ues and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 11 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until "SOUN" is displayed, and press
ENTER. Press the UP or DOWN buttons so that "ON" is dis-
played and press ENTER.
2. Press the MENU button until "SENS" is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Press the MENU button until "SHND" is displayed, and press
ENTER.
2. Press the UP or DOWN buttons to find your desired show, and
press ENTER.
ADJ Products, LLC - www.adj.com - Inno Pocket Wash Instruction Manual Page 18
This function allows you to use a Elation

Operation

Inno Pocket Wash
Master-Slave Operation
®
units together and operate without a controller. The units will be sound
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. On the Master unit press the MENU button until "SLND" is dis-
played, and press ENTER. Use the UP and DOWN buttons to
scroll to the "MAST" setting and press ENTER.
3. After setting the Master unit to the master setting find and set
your desired operating mode.
4. On the slave units press the MENU button until "SLND" is dis-
played, and press ENTER. Choose either "SL 1" or "SL 2" and
press ENTER. See page 11 for more info.
5. The slave units will now follow the Master unit.
ADJ Products, LLC - www.adj.com - Inno Pocket Wash Instruction Manual Page 19

Master-Slave Set Up

This function will allow you to link up to 16