ADJ Inno Pocket Wash User Instructions page 8

Inno Pocket Wash
PINT
- Pan Inversion
1. Press the MENU button until "PINT" is displayed, press
ENTER. Either "Yes" or "No" will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons
until "Yes" is displayed, press ENTER to confim. To deactivate
Pan inversion, select "No" and press Enter.
TINT
- Tilt Inversion
1. Press the MENU button until "TINT" is displayed, press
ENTER. Either "Yes" or "No" will be displayed.
2. To activate the tilt inversion press the UP or DOWN buttons
until "Yes" is displayed, press ENTER to confim. To deactivate
tilt inversion, select "No" and press Enter.
LED -
With this function you can have the display back-
light turn off after 10 seconds.
1. Press the MENU button until "LED" is displayed, press
ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to keep the LED display on at
all times, or "OFF" to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm. To make you LED display reappear
again press any button.
DISP -
This function will reverse the display 180º.
1. Press the MENU button until "DISP" is displayed, press
ENTER.
2. Press ENTER to "flip" the display. Press ENTER to "flip" it
ADJ Products, LLC - www.adj.com - Inno Pocket Wash Instruction Manual Page 14
System Menu Inno Pocket Wash
again. Press ENTER when you have made your desired setup.
TEST
1. Press the MENU button until "TEST" is displayed, press
ENTER.
2. The fixture will now run a self test.
MANU
functions; pan, tilt, LEDs, dimmer, and strobe.
1. Press the MENU button until "MANU" is displayed, press
ENTER.
2. Use the UP and DOWN buttons to scroll through the various
functions able for testing. Once you have found your desired
function you would like to test press ENTER.
3. After you have pressed ENTER, use the UP and DOWN but-
tons to adjust the values and test the function. To exit press the
MENU button.
TEMP
of the fixture.
1. Press the MENU button until "TEMP" is displayed, press
ENTER.
2. The fixture temperature will now be displayed. Press MENU
to exit.
FHRS
time of the unit.
1. Press the MENU button until "FHRS" is displayed, press
ENTER.
ADJ Products, LLC - www.adj.com - Inno Pocket Wash Instruction Manual Page 15
- This function will run a self test program.
- In this submenu you are able to test the different
- With this function you can check the temperature
- With this function you can display the running
System Menu