Advertisement

Quick Links

User Instructions
4/12
Inno Roll LED
Unpacking:
Thank you for purchasing the Inno Roll LED by Ameri-
can DJ
. Every Inno Roll LED has been thoroughly tested and has
®
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without con-
tacting customer support first.
Introduction:
The Inno Roll LED is a 8 channel DMX intelligent LED
scanner. The Inno Roll LED has three operating modes; a sound active,
show mode, DMX controlled. The Inno Roll LED can operate as a stand
alone fixture or in a Master/Slave configuration. For best results use
fog or special effects smoke to enhance the beams projections.
Customer Support:
American DJ
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
American DJ
- www.americandj.com - Inno Roll LED Instruction Manual Page 2
®
General Information
provides a toll free customer
®

Advertisement

Table of Contents
loading

Summary of Contents for ADJ InnoRollLED

  • Page 1 Inno Roll LED General Information Unpacking: Thank you for purchasing the Inno Roll LED by Ameri- can DJ . Every Inno Roll LED has been thoroughly tested and has ® been shipped in perfect operating condition. Carefully check the ship- ping carton for damage that may have occurred during shipping.
  • Page 2: General Instructions

    Inno Roll LED Safety Precautions Inno Roll LED General Instructions To optimize the performance of this product, please read these For Your Own Personal Safety, Please Read and Understand This operating instructions carefully to familiarize yourself with the basic Manual Completely Before You Attempt To Install Or Operate operations of this unit.
  • Page 3 Using a cable terminator Operation): The Inno Roll LED can be controlled via DMX-512 proto- (ADJ part number Z-DMX/T) will decrease the possibilities of erratic col. The Inno Roll LED is a 8 channel DMX unit. The DMX address is behavior.
  • Page 4: System Menu

    Inno Roll LED Set Up Inno Roll LED System Menu 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting stan- dard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores.
  • Page 5 Inno Roll LED System Menu Inno Roll LED System Menu ADDR - at any time using the UP or DOWN buttons. DMX Address Setting. 1. Press the MENU button until “ADDR” is displayed, press SPLC - Split Color mode. With this mode active, color ENTER.
  • Page 6 Inno Roll LED System Menu Inno Roll LED System Menu SENS - press ENTER. In this mode you can adjust the sound sensitivity. 2. Press the UP button to select “DSIP” to “flip” the display, or 1. Press the MENU button until “SENS” is displayed, press “DISP”...
  • Page 7 Inno Roll LED System Menu Inno Roll LED Color & Gobo Adjustment 2. The running time of the fixture will now be displayed. Press MENU to exit. - With this function you can display the version soft- ware of the unit. To enter the Color/Gobo wheel adjustment submenu, press the ENTER button for at least 5 seconds.
  • Page 8: Operation

    Inno Roll LED Operation Inno Roll LED Operation 2. To control your fixture in DMX mode, follow the set-up procedures Operating Modes: The Inno Roll LED can operate in three dif- on pages 5-7 as well as the set-up specifications that are includ- ferent modes.
  • Page 9 Inno Roll LED 8 Channel Mode Inno Roll LED 8 Channel Mode Channel Value Function Channel Value Function 0 - 255 PAN 0° - 180° COLOR WHEEL CONT. TILT 128 - 191 CLOCKWISE ROTATION FAST - SLOW 0 - 9 STOP 192 - 255 COUNTER-CLOCKWISE ROTATION...
  • Page 10 Inno Roll LED 8 Channel Mode Inno Roll LED Gobo Replacement This unit comes with interchangable gobos. When changing Channel Value Function the gobos please be very careful. Follow the instructions below, RESET/BLACKOUT 130 - 199 NO FUNCTION and see the figure pictures on the next page. 200 - 209 RESET ALL Caution! Never open the unit when in use.
  • Page 11: Troubleshooting

    Inno Roll LED Fuse Replacement Inno Roll LED Warranty Locate and remove the unit’s power cord. Once the cord has been MANUFACTURER’S LIMITED WARRANTY American DJ, Inc. hereby warrants, to the original purchaser, American DJ and American removed located the fuse holder located inside the power socket. Audio products to be free of manufacturing defects in material and workmanship for a prescribed Insert a flat-head screw driver into the power socket and gently pry period from the date of purchase (see specific warranty period on reverse).
  • Page 12: Specifications

    Inno Roll LED Specifications Model: Inno Roll LED Voltage: 100V ~ 240V/50~60Hz 1 x 50W LED LED: 103W Power Consumption: 11”(L) x 8.25”(W) x 22”(H) Dimensions: 274mm x 208mm x 555mm Beam Angle: 40 Degree 14 Lbs. / 6.3 kgs. Weight: 2 Amp Fuse:...

Table of Contents