Advertisement
Quick Links
Advertisement
Related Manuals for ADJ IKON IR
Summary of Contents for ADJ IKON IR
- Page 1 IKON IR User Manual Revised 05/18/2023...
- Page 2 ©2023 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying prod- uct names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
-
Page 3: Table Of Contents
T A B L E O F C O N T E N T S Introduction Warranty Registration Limited Warranty (USA Only) Safety Precautions Operation | Gobo Replacement UC IR Remote | Photometric Chart Installation | Power Cord Daisy Chain | Trouble Shooting Fuse Replacement | Cleaning Specifications... -
Page 4: Introduction
Please keep this manual with the unit for future reference. Unpacking: Thank you for purchasing the Ikon IR by ADJ Products, LLC. Every unit has been thor- oughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. -
Page 5: Warranty Registration
W A R R A N T Y R E G I S T R A T I O N This unit carries a two year limited warranty. Please fill out the enclosed warranty card to validate your purchase. All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. -
Page 6: Limited Warranty (Usa Only)
The sole responsibility of ADJ Products, LLC under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear identifying marks to that effect. -
Page 7: Safety Precautions
S A F E T Y P R E C A U T I O N S • This unit has a built in fuse that is designed to blow or trip when the maximum current load (7 amps) is reached or exceeded. The fuse will subsequently need to be replaced. Refer to the Fuse Replacement section of this manual for detailed information. -
Page 8: Operation | Gobo Replacement
O P E R A T I O N The ADJ Ikon IR is a rotating gobo projector. This fixture is designed for mobile DJ’s, clubs, bands, roller rinks and any arena that requires a compact, light weight, easy to use unit. This fixture is also suitable for theaters, studios, retail stores, and other similar locations. -
Page 9: Uc Ir Remote | Photometric Chart
U C I R R E M O T E The UC IR (sold separately) infrared remote gives you control of various functions, as listed below. The remote must be aimed towards the front of the fixture, and maximum range is 30 feet. CONTROLS •... - Page 10 I N S T A L L A T I O N The unit should be mounted using a mounting clamp (not provided), and affixing it to the mount- ing bracket that is provided with the unit. Always ensure that the unit is firmly fixed to avoid vibration and slipping during operation.
-
Page 11: Fuse Replacement | Cleaning
F U S E R E P L A C E M E N T Disconnect the unit from power. Locate the fuse holder inside the I.E.C power cord output socket, and use a flathead screw driver to unscrew and remove the fuse holder. Remove the bad fuse and replace with a new fuse of the same rating. -
Page 12: Specifications
Beam Angle: 25, 32 or 43 degrees (Includes 3 different lenses) • Long life LED (Rated at approximately 50,000 hrs.) • IEC AC outlet on side to daisy chain power (up to 9 Ikon IR’s @ 120V and 17 Ikon IR’s @ 230V) • Color Temperature: 8500K •... - Page 13 This page intentionally left blank.
Need help?
Do you have a question about the IKON IR and is the answer not in the manual?
Questions and answers