Installing The System Cover - Dell PowerEdge R630 Owner's Manual

Figure 14. Removing and installing the system
1. latch release lock
3. latch

Installing the system cover

Prerequisites
Ensure that you read the
Steps
1. Align the slots of the system cover with the tabs on the chassis.
2. Press the cover release latch, and push the cover toward the front of the chassis until the latch locks
into place.
3. Turn the latch release lock clockwise to the locked position.
4. Install the optional bezel.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Safety instructions.
2. system cover
53