Removing An Expansion Card - Dell PowerEdge R630 Owner's Manual

Table 4. Systems supporting two PCIe expansion cards
Riser PCIe Slot
2 1
3 2
NOTE: Only a three-fourth length card is supported for the PCIe expansion card slot (slot 2) on riser
3.
NOTE: For a server with three PCIe cards, only MiniSAS HD third party cards are supported in slot 3.
For a server with two PCIe cards, only MiniSAS HD third party cards are supported in slot 1.
NOTE: You can install expansion cards only on one slot on riser 2.
NOTE: Both the processors must be installed to use the x16 link on the riser 2 slot.
The following table provides a guide for installing expansion cards to ensure proper cooling and
mechanical fit. The expansion cards with the highest priority must be installed first using the slot priority
indicated. All other expansion cards must be installed in the specified card priority and slot priority order.
Table 5. Expansion-card installation priority
Card Priority Card Type
1 PCIe Bridge
2 RAID
3 40 G NICs
4 10 Gb NICs
5 FC16 HBA
6 FC8 HBA
7 FC4 HBA
8 FC16 HBA
9 1 Gb NICs
10 Non-RAID
11 Integrated RAID
12 NDC

Removing an expansion card

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
80
Processor Height
Connection
Processor 1 Low Profile
Processor 2 Low Profile
Processor 1 Full height
Systems Supporting up to 2
PCIe Expansion Cards
Slot Priority
N/A
1
2, 1
2, 1
2, 1
2, 1
2, 1
2,1
2, 1
2
Integrated Slot
Integrated Slot
Safety instructions.
Before working inside your
Length
Half Length
Half Length
Three-fourth
Length
Systems Supporting up to 3 PCIe
Max Allowed Slot Priority
N/A 1
1 3, 1
1 3,2
2 3, 2, 1
1 3, 2, 1
1 3, 2, 1
1 3, 2, 1
1 N/A
1 3, 2, 1
1 N/A
1 Integrated Slot 1
1 Integrated Slot 1
system.
Link Slot Width
Width
x8 x16
x16 x16
x16 x16
Expansion Cards
Max Allowed
1
2
1
3
1
3
3
N/A
3
N/A