Removing A 1.8 Inch Hard-Drive Blank; Installing A 1.8 Inch Hard-Drive Blank - Dell PowerEdge R630 Owner's Manual

Steps
Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.

Removing a 1.8 inch hard-drive blank

Prerequisites
1. Ensure that you read the
2. If installed, remove the front bezel.
CAUTION: To maintain proper system cooling, all empty hard-drive slots must have hard-drive
blanks installed.
Steps
Press the release button and slide the hard-drive blank out of the hard-drive slot.
Figure 22. Removing and installing a 1.8 inch hard-drive blank
1. hard-drive blank
Next steps
If applicable, install the front bezel.

Installing a 1.8 inch hard-drive blank

Prerequisites
1. Ensure that you read the
2. If installed, remove the front bezel.
68
Safety instructions.
Safety instructions.
2. release button