Hard-Drive Backplane; Removing The Hard-Drive Backplane - Dell PowerEdge R630 Owner's Manual

Figure 46. Installing the system battery
1. system battery
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in
3. While booting, press <F2> to enter the System Setup and ensure the battery is operating properly.
4. Enter the correct time and date in the System Setup Time and Date fields.
5. Exit the System Setup.

Hard-drive backplane

Depending on your configuration,
8–Hard-drive 2.5 inch (x4) SAS/SATA backplane
system
supports
10–Hard-drive 2.5 inch (x10) SAS/SATA backplane that supports X10 and 4 (PCIe SSDs) + 6
system
supports
24–Hard-drive 1.8 inch (x24) SAS/SATA backplane
system
supports

Removing the hard-drive backplane

Prerequisites
1. Ensure that you read the
After working inside your
Safety instructions.
2. positive side of the battery connector
system.
107