4-6 PNP/PCI Configuration
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ's may cause the system to not find certain devices.
PNP OS Installed: Do you have a PNP OS installed on your system. The default
is No.
Reset Configuration Data: This setting allows you to clear ESCD data.
The default is Disabled
Disabled: Normal Setting.
Enabled:
If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can
set this field to Enabled in order to clear ESCD.
Resources Controlled By: Who controlled the system PNP/PCI resources.
The default is Auto.
Figure 7: PCI Configuration Setup
BIOS
Page 4-21