EPOX MVP3E Specification

EPOX MVP3E Specification

Isa/pci/agp motherboard

Advertisement

Apollo MVP3 AGPset
MVP3E
ISA/PCI/AGP
MotherBoard
with Onboard PCI IDE and Super Multi-I/O.
TRADEMARK
All products and company names are trademarks or registered
trademarks of their respective holders.
The specification is subject to change without notice.
V034

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MVP3E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EPOX MVP3E

  • Page 1 Apollo MVP3 AGPset MVP3E ISA/PCI/AGP MotherBoard with Onboard PCI IDE and Super Multi-I/O. TRADEMARK All products and company names are trademarks or registered trademarks of their respective holders. The specification is subject to change without notice. V034...
  • Page 2 Introduction Chapter 1 Introduction This motherboard is a high performance system hardware based on Intel Pentium processor and is equipped with an AGP slot, four PCI slots, three standard ISA slots, Super Multi-I/O controller and dual port PCI-IDE connectors for the future expansion. The hardware dimension is 305mm x 230mm with a four-layer-design technology.
  • Page 3 MVP3E MVP3E Layout ATX Power Conn. SOCKET 7 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3...
  • Page 4 Hardware Design 2-2 Connectors and Jumpers This section describes the connectors and jumpers equipped in the motherboard. Please refer to Figure 2-1 for the location of each connector and jumper. Pentium / MMX Cyrix / IBM AMD K5 / K6 6x86L idt - C6 6x86MX...
  • Page 5 MVP3E Reset Switch - Closed to restart system. Speaker - connect to the system's speaker for beeping. 1. Speaker 2. N/C 3. GND 4. VCC KeyLock - Keyboard lock switch & Power LED connector. 1. Power LED(+) 2. N/C 3. GND 4.
  • Page 6: System Memory Configuration

    Hardware Design 2-3 System Memory Configuration This motherboard supports different type of settings for the system memory. The following figures and table provides all possible memory combinations. > BANK 0 DIMM1 > DIMM2 BANK 1 > DIMM3 BANK 2 > SIMM1 BANK 2 SIMM2...
  • Page 7 Hardware Design 2-5 External Modem Ring-in Power ON and Keyboard Power ON Functions On the basis of bounded functions in I/O chipset, the two serial ports are able to support the External Modem Ring-in Power ON function. Once users connect the external modem to COM1 or COM2, this motherboard allows users to turn...

Table of Contents