EPOX MU-8KHA User Manual page 43

State After Power Failure: This field lets you determine the state that your PC
returns to after a power failure. If set to OFF, the PC will not boot after a power
failure, if set to ON, the PC will restart after a power failure.
IRQ/Event Activity Dectect
PS2KB Wakeup Select : This item allows you to select Hot Key or Password
to wake-up the system by PS2 Keyboard. When select Password, please press
ENTER key to change password max 8 numbers.
PS2KB Wakeup form S3/S4/S5: This item allows you to set a Hot Key to wake-
up the system by PS2 Keyboard.
The choice: Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,
Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake, Any
key.
Note: Power and Wake are Windows98 Keyboard button.
VGA: When set to On, any event occurring at a VGA port will awaken a system
which has been powered down.
LPT & COM: When set to LPT/COM, any event occurring at a COM(serial)/
LPT (printer) port will awaken a system which has been powered down.
HDD & FDD: When set to On, any event occurring at a hard or floppy drive
port will awaken a system which has been powered down.
PCI Master: When set to Off, any event occurring to the DMA controller will
awaken a system which has been powered down.
BIOS
Page 4-19