Pnp/Pci Configuration Setup - EPOX EP-GXB-M Manual

Award BIOS Setup

PNP/PCI Configuration Setup

The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ's may cause the system to not find certain devices.
PNP OS Installed: Do you have a PNP OS installed on your system. The default is
No.
Resources Controlled By: Allows manual setting of resources or automatic by the
PNP BIOS. The default is Manual.
• Manual: PNP Card's resources will be controlled manually. You can set which
IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy ISA Cards.
• Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign the
interrupt resource automatically.
Reset Configuration Data: This setting allows you to clear ESCD data. The default
is Disabled
• Disabled: Normal Setting.
• Enabled: If you have plugged in some Legacy cards to the system and they were
Page 56
Figure 6: PCI Configuration Setup
EP-GXB-M