Advertisement
Quick Links
ISA/PCI Motherboard with Onboard AGP
VGA, PCI Audio, PCI IDE and Super
Multi-I/O
TRADEMARK
All products and company names are trademarks or
registered trademarks of their respective holders.
These specifications are subject to change without notice.
Manual Revision 1.0
August 9, 1999
Advertisement
Related Manuals for EPOX MVP4F
Summary of Contents for EPOX MVP4F
- Page 1 ISA/PCI Motherboard with Onboard AGP VGA, PCI Audio, PCI IDE and Super Multi-I/O TRADEMARK All products and company names are trademarks or registered trademarks of their respective holders. These specifications are subject to change without notice. Manual Revision 1.0 August 9, 1999...
- Page 2 Supports (2) 32 bit PCI slots, (1) AMR Slot and provides (2) independent high performance PCI IDE interfaces capable of supporting PIO Mode 3/4 and Ultra DMA 33/66 devices. The MVP4F supports (2) PCI Bus Master slots and a jumperless PCI INT# control scheme which reduces configura- tion confusion when plugging in PCI card(s).
- Page 3 Features MVP4F • Supports ring-in feature (remote power-on through external modem, allows system to be turned on remotely). • Resume by Alarm - Allows your system to turn on at a preselected time. • Supports CPU Hardware sleep and SMM (System Management Mode).
- Page 4 Installation MVP4F MVP4F Detailed Layout Figure 1 Page 4...
-
Page 5: Installation
MVP4F Installation The following must be completed before powering on your new system: Configure Jumpers System Memory Configuration Device Connectors We design this motherboard with the fastest jumpers to make your install fast and easy. Note: The jumpers as depicted as shown (Figure 1) in their correct physical orientation. - Page 6 Installation MVP4F CPU Type Multiplier Pentium/MMX Clock Cyrix /IBM AMD K6/K6-2/K6III IDT Winchip 2 Rise MP6 6x86MX/MII IDT-C6 166MHz PR200 ON ON 66MHz PR233 ON ON ON 75MHz PR266 233MHz ON ON 83MHz 2.5X PR300 *PR333 ON ON 95MHz 250MHz...
- Page 7 MVP4F Installation The MVP4F supports (2) 168-pin DIMMs (Dual In-line Memory Module). The DIMMs can be either EDO (Extended Data Out) or SDRAM (Synchronized DRAM). The DIMMs may be installed using just one chip. • DIMM SDRAM may be 83MHz (12ns), 100MHz (10ns) or 125MHz (8ns) bus speed.
- Page 8 MVP4F Installation Please install the motherboard into the chassis. parallel port Joystick/Midi PS/2 Mouse USB port PS/2 KEYBOARD COM1 VGA1 Speaker Line_in Figure 6 Chassis Panel Connector • Power LED, Speaker, Reset Power_ON/OFF, Turbo LED, HDD LED, IR Connector CPU Fan Power •...
- Page 9 Installation MVP4F (This is connected to the power button on the case. Using the Soft-Off by Pwr-BTTN feature, you can choose either Instant Off (turns system off or 4 sec delay (you need to immediately), hold the button down for 4 seconds before the system turns off).
Need help?
Do you have a question about the MVP4F and is the answer not in the manual?
Questions and answers