4-5 Power Management Setup
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not
be changed unless it's absolutely necessary.
ACPI Function: This option allows you to select ACPI Function.
The default is Enabled.
The Choice: Enabled, Disabled.
ACPI Suspend Type: This item allows you to select S1(POS) or S3(STR) function.
The choice: S1(POS), S3(STR).
Power Management Option: Use this to select your Power Management selection.
The default is User define.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each mode.
Min. saving:
Minimum power savings. Inactivity period is 1 hour in each mode.
User define: Allows user to define PM Timers parameters to control power
saving mode.
Figure 6: Power Management Setup
BIOS
Page 4-17