Pnp/Pci Configuration Setup - EPOX EP-3WXM2 User Manual

EP-3WXM/2/4

4-6 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the
speed the CPU itself uses when communicating with its own special components.
This section covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default settings.
CMOS Setup Utility – Copyright © 1984-1998 Award Software
PnP OS Installed
Reset Configuration Data
Resources Controlled By
Ø IRQ Resources
Ø DMA Resources
Ø Memory Resources
PCI/VGA Palette Snoop
­¯¬®Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values
PNP OS Installed
This item allows you to determine install PnP OS or not.
The choice: Yes, No.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system can not boot.
The choice: Enabled, Disabled .
PnP/PCI Configurations
No
Disabled
Manual
Press Enter
Press Enter
Press Enter
Disabled
F6:Fail-safe defaults
Item Help
-------------------------
Ø
Menu Level
Default is Disabled. Select
Enabled to reset Extended System
Configuration Data(ESCD) when you
exit Setup if you have installed
a new add-on and the system
reconfiguration has caused such a
serious conflict that the OS
cannot boot
F7:Optimized Defaults
BIOS
Page 4-19