Pnp/Pci Configuration Setup - EPOX SiS 661FX User Manual

BIOS
4-6 PNP/PCI Configuration
This page lets the user to modify the PCI IRQ signals when various PCI cards are
inserted.
WARNING: Conflicting IRQ's may cause system unable to locate certain devices.
Reset Configuration Data
This setting allows you to clear ESCD data.
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can set
this field to Enabled in order to clear ESCD.
Resources Controlled By
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Card's resources are controlled manually. The "IRQ Resources" field
becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI and onboard devices.
Auto: BIOS assigns the interrupt resource automatically.
Page 4-18
Figure 7: PNP/PCI Configuration Setup