Pnp/Pci Configuration Setup - EPOX EP-LX370Y User Manual

3-6 PNP/PCI Configuration
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ's may cause the system to not find certain
devices.
PNP OS Installed: Select Yes if you are using a PNP OS, otherwise select PNP OS Installed PNP OS Installed
PNP OS Installed PNP OS Installed
No. The default is No.
Reset Configuration Data Reset Configuration Data
Reset Configuration Data Reset Configuration Data Reset Configuration Data: This setting allows you to clear ESCD data.
The default is Disabled
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they
were recorded into ESCD (Extended System Configuration Data),
you can set this field to Enabled in order to clear ESCD.
Resources Controlled By: Who controlled the system PNP/PCI resources. Resources Controlled By Resources Controlled By Resources Controlled By Resources Controlled By
The default is Auto.
Manual: PNP Card's resources will be controlled manually. You can set
which IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy
ISA Cards.
BIOS
Figure 7: PCI Configuration Setup
Page 3-21