Magnetic Lock; Solenoid; Guard Station - Viking X-9 Installation Instructions And Safety Information

ACCESSORY CONNECTIONS ACCESSORY CONNECTIONS
2
Connection Locations
(Single Unit Board shown)
Solenoid Connection
External supply for the solenoid connection
must be provided. This will prevent rapid
drainage of the battery in the event of
power failure.
Relay Contact 10A-250VAC
Guard Station
Slave Slave Guard Station Guard Station
COM
24
1
60sec
Open Command Open Command
2
N.O.
OPEN
N.O.
STOP
N.O.
CLOSE
Magnetic Lock
External supply for the magnetic lock must
be provided. This will prevent rapid drainage
of the battery in the event of power failure.
Relay Contact 10A-250VAC
1
Mag. Mag.
Lock Lock
Radio Station Radio Station
1
Mag. Mag.
Lock Lock
Radio Station Radio Station
The guard station provides control of the
gate operator to open, stop and close the
gate.
All three switches must be Normally Open
type of switch, and can share the same
common (ground).
Place the control switch box within sight of
the gate, away from moving parts of the
gate and out of reach of children.
TECHNICAL SUPPORT 1 800 908 0884
N.C.
COM
N.O.
N.C.
COM
N.O.