Magnetic Lock; Solenoid; Guard Station - Viking G-5 Installation Instructions Manual

ACCESSORY CONNECTIONS ACCESSORY CONNECTIONS
Overlap Delay
2
Connection Locations
Close Stop Open
(Single Unit Board shown)
Viking Access Systems can supply an
Overlap Delay
excellent Magnetic Lock unit (part number
VA-MAG13). See page 24 for more details.
Guard Station Guard Station Open Commands Open Commands
Solenoid Connection
Close Stop External supply for the solenoid connection Open
must be provided. This will prevent rapid
drainage of the battery in the event of
power failure.
Relay Contact 10A-250VAC
Guard Station Guard Station Open Commands Open Commands
Guard Station
The guard station provides control of the
gate operator to open, stop and close the
gate.
All three switches must be Normally Open
type of switch, and can share the same
common (ground).
Place the control switch box within sight of
the gate, away from moving parts of the
gate and out of reach of children.
24
Obstruction
Center Safety
Sensor
Loop Loop
1
min. MAX
Hold Open
Timer
Obstruction
Center Safety
Sensor
Loop Loop
Safety Connector Loop Connector
min. MAX
Hold Open
Timer
Safety Connector Loop Connector
TECHNICAL SUPPORT 1 800 908 0884
Fail
Magnetic Lock
Safe/Secure
External supply for the magnetic lock must
be provided. This will prevent rapid drainage
UL Radio
Sensor Rec.
of the battery in the event of power failure.
Relay Contact 10A-250VAC
1
Mag.
Lock
UL Radio
Sensor Rec.
Radio Station Radio Station
1
Mag.
Lock
Radio Station Radio Station
Brake
Master/Slave Master/Slave
UL
Siren
2
Charger Charger
Power Power
Low Battery Low Battery
Motor Sensor Motor Sensor
N.C.
COM
Charger Charger
N.O.
Power Power
Low Battery Low Battery
Motor Sensor Motor Sensor
Overlap Delay
N.C.
COM
N.O.
Close Stop Open
Guard Station Guard Station Open Commands Open Commands
N.O.
OPEN
N.O.
STOP
N.O.
CLOSE
COM
Obstruction
Center
Sensor
Loop
min. MAX
Hold Open
Timer
Saf Loo
25