Magnetic Lock; Solenoid Connection; Guard Station - Viking R-6 Installation Instructions And Use & Care Manual

ACCESSORY CONNECTIONS ACCESSORY CONNECTIONS
1
Connection Locations
Viking Access Systems can supply an
excellent Magnetic Lock unit (part number
VA-MAG13). See page 24 for more details.
Solenoid Connection
External supply for the solenoid connection
must be provided. This will prevent rapid
drainage of the battery in the event of
power failure.
Relay Contact 10A-250VAC
Guard Station
The guard station provides control of the
gate operator to open, stop and close the
gate.
All three switches must be Normally Open
type of switch, and can share the same
common (ground).
Place the control switch box within sight of
the gate, away from moving parts of the
gate and out of reach of children.
Radio Station
N.O.
COM
N.C.
24
Mag.
Lock
2
Loop Connector
1sec
TECHNICAL SUPPORT 1 800 908 0884
Magnetic Lock
External supply for the magnetic lock must
be provided. This will prevent rapid drainage
of the battery in the event of power failure.
Relay Contact 10A-250VAC
2
Open Commands
off 60sec
Open
30sec
Hold Open
Timer
Limit
Radio Station
1
N.O.
COM
N.C.
Motor Sensor
Low Battery
Power
Charger
Radio Station
N.O.
COM
N.C.
1
N.O.
OPEN
Motor Sensor
N.O.
Low Battery
STOP
Power
N.O.
Charger
CLOSE
COM
Guard Station
Master/Slave
Stop Close
Limit
Loo
Mag.
Lock
Radio UL
Rec. Sensor
Loo
Mag.
Lock
F
Radio UL
Fail Saf
Safe/
Rec. Sensor
UL
Siren
25
Brake F
Fail Saf
Safe/